Affichage des articles dont le libellé est Remote. Afficher tous les articles
Affichage des articles dont le libellé est Remote. Afficher tous les articles

Maintaining ISA Server 2004

How to Implement Remote Administration :

In most organizations, you will not perform ISA Server administration directly from the ISA Server computer console. The ISA Server computer should be located in a physically secure server room and you should administer the server from your client computer. If your organization has multiple locations with ISA Servers installed in each location, you may need to manage all the servers from your desktop. Remote administration enables you to administer ISA Server in all these cases.

You have two options for remotely administrating ISA Server. You can use a Terminal Services or Remote Desktop connection to administer the server, or you can install the ISA Server Management Console on another computer and use it to manage the ISA Server computer.

If you have installed ISA Server on a server running Windows 2000, you can use Terminal Services to manage the ISA Server computer. If ISA Server is installed on a computer running Windows Server 2003, you can use Remote Desktop in the same way. When you use Terminal Services or Remote Desktop to administer the ISA Server computer, you can view the desktop of the ISA Server computer as if you were in front of the monitor attached to the ISA Server computer. The advantage of using Terminal Services or Remote Desktop to administer ISA Server is that you can manage virtually all the settings on the server, not just ISA Server.

To enable remote administration of ISA Server on computers running Windows Server 2003, you must be a member of the Administrators group or Remote Desktop Users group on the ISA Server computer, or be granted permission to use Remote Desktop to connect to the server. To enable remote administration of ISA Server running on a Windows 2000 computer, you must install Terminal Services on the server in either Application or Remote Administration mode. Then the user properties must be configured to allow remote connections using Terminal Services.

To run ISA Server Management, you need the following:
1- A personal computer with a 300-megahertz (MHz) or higher, Pentium II–compatible CPU
2- Windows Server 2003, Windows 2000 Server or Windows 2000 Professional, or Windows XP
3- 256 megabytes (MB) of memory
4- 19 MB of available hard-disk space.

When you install ISA Server, the default system policy allows remote administration from all members of a computer set named Remote Management Computers. This computer set is used to assign remote access permissions in both the MMC system policy configuration group and the Terminal Services configuration group. By default, no computers are in this group, so no computers can connect to the ISA Server computer for remote management. To enable remote management on the ISA Server computer, you must configure remote administration by editing the appropriate MMC or Terminal Server configuration group in the System Policy editor.

Key Terms
administrative role Used to assign permissions on ISA Server. Each administrative role has a predefined set of permissions that allow the user to perform specific tasks on the ISA Server computer.

firewall access rule A configuration object on ISA Server that defines what types of network traffic will be allowed on the ISA Server computer. By default, all network traffic is blocked unless a firewall access rule allows the specific traffic.

Remote Management Computers A computer set that is used to provide remote management access to ISA Server. This computer set should include all the IP addresses of the computers that are used to perform remote administration on the ISA Server computer.

system policy A set of firewall access rules that controls how the ISA Server computer communicates with computers on the attached networks.

MCP 70-299 : Module 12 Securing Remote Access

Lesson 3: Configuring Remote Access Clients

You can configure clients to connect to a remote access server in one of two ways: by using the network connection properties or by using the Connection Manager Administration Kit (CMAK). Manually configuring a connection by using network connection properties is convenient when you are using the default security settings or when you need to configure fewer than ten clients. However, it would not be possible to configure and maintain VPN or dial-up network connection configurations on hundreds or thousands of client computers.

The CMAK allows you to easily configure large numbers of clients by creating an executable file that you can distribute to your users. When your users run the file, it creates a dial-up or VPN connection with your customized security settings. If you later change authentication or encryption methods, you can re-run the CMAK and distribute a new executable file to overwrite the previous configuration. You can even automate the distribution of the CMAK executable file by distributing it with a Group Policy object.

Configuring Client-Side Authentication Protocols :

You create a remote access connection by using the New Connection Wizard, as described in Lesson 2, Exercise 2. However, the New Connection Wizard does not allow you to configure the acceptable authentication or encryption settings for the connection. To view or modify the authentication protocols enabled for a remote access connection on the client, open the properties dialog box of the dial-up or VPN connection on the client, and then click the Security tab.

The Typical option is selected, and a secured password and data encryption are required. Automatically Use My Windows Logon Name And Password is not selected. This default setting is the
more secure choice. If you choose to automatically use the current credentials, an intruder who takes over the active desktop of the client can successfully authenticate and connect to your internal network, potentially compromising far more than a single computer. When the option is cleared, the user must provide credentials each time a connection is made.

CMAK Wizard :

Manually configuring remote access connections on clients is straightforward, but configuring
hundreds or thousands of clients would be impossible. Unfortunately, you cannot use Group Policy objects to directly control a user’s available network connections. However, you can use the CMAK to create an executable file that you can deploy to users. When users run this file, the CMAK adds a connection by using the settings you specified with the CMAK wizard.

Though most of the pages of the wizard do not involve security settings, there are several important pages that you can use to control the security settings on the resulting network connection. Specifically, the VPN Entries and Dial-Up Networking Entries pages allow you to restrict authentication and encryption on the client. The VPN Entries and Dial-Up Networking Entries pages are identical, except that the VPN settings allow you to choose between PPTP and L2TP.

70-299 : Module 12 : Securing Remote Access

Lesson 1: Remote Access Fundamentals

Windows Server 2003 provides two main types of remote access methods: dial-up and VPN. For each remote access type, there are several authentication and encryption protocols to choose from. You will have to choose the remote access type and security protocols based on the clients that will be connecting to your internal network and based on your existing infrastructure. This lesson will describe the two remote access methods and the various encryption and authentication protocols to allow you to make educated recommendations.

Remote Access Methods :

There are two primary methods for connecting remote users to a private network: dialup networking and virtual private networking. Dial-up networking enables a remote access client to establish a temporary dial-up connection to a physical port on a remote access server by using the service of a telecommunications provider, such as analog phone lines, Integrated Services Digital Network (ISDN), or X.25. The most common use of dial-up networking is that of a dial-up networking client that dials the phone number of a modem attached to the remote access server. This establishes a circuit
between the two devices.

Virtual private networking is the creation of an encrypted, authenticated point-to-point connection across a public network such as the Internet. A VPN client uses special network protocols called tunneling protocols to make a virtual call to a virtual port on a VPN server.

VPN Protocols :

Windows Server 2003 supports two VPN protocols: PPTP and L2TP. In most circumstances,either protocol will work equally well. They both provide similar levels of privacy and data integrity because they support the same authentication and encryption standards. They primarily differ in stability and compatibility. PPTP is more mature, but it is not an Internet standard. L2TP is relatively new, but it might be supported by a wider variety of non-Microsoft clients because it is an Internet standard.

Google